Erik Herbert

Profile Picture of Erik Herbert
Title
Assistant Professor

Department
Materials Science and Engineering

Institution
Michigan Technological University

Email
eherbert@mtu.edu
Education
  • PhD Materials Science and Engineering, University of Tennessee, Knoxville
Research Interests
Mechanical Behavior   Material Science, Materials Science   Solid State  

  View all research interests
Biography
2015-present Assistant Professor, Michigan Technological University, Department of Materials Science and Engineering, Houghton, MI 2010-2014 Assistant Research Professor, University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN 2009-2010 Post-doctoral research associate, University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN 2009 Visiting Scientist, Centre for Research on Adaptive Nanostructures and Nanodevices (CRANN) at Trinity College, Dublin, Ireland 2008-2009 Staff Scientist, Research and Development, Agilent Technologies, Oak Ridge, TN 2007-2008 Staff Scientist, Research and Development, MTS Systems Corporation, Oak Ridge, TN 2003-2006 Manager, Analytical Services Laboratory, MTS Systems Corporation, Oak Ridge, TN 1998-2002 Applications Engineer, MTS Systems Corporation, Oak Ridge, TN 1997-1998 Laboratory Technician, Nano Instruments, Oak Ridge, TN
Homepages
Contact Information
Not mentioned yet.
Research
Not mentioned yet. (?)
List of Publications (126)
In 2020
126

"High Temperature Plasticity of Microalloyed Aluminum: Influence of Rapid Solidification and Wrought Processing on Precipitation Strengthening and Deformation Mechanisms," US Department of Defense, September 2016 - August 2019, $502,467, Co-PI with PI Paul Sanders and Co-PI Stephen A. Hackney at MTU. Currently operating on a no cost extension through August of 2020.

Found on CV
125

"Collaborative Research: The Role of Grain Boundary Structure and Chemistry in Materials Failure," US Department of Energy, July 2016 - June 2019, $428,576, Co-PI with PI Stephen A. Hackney at MTU. Currently operating on a no cost extension through June of 2020.

Found on CV
124

"Elucidation of the coupling between electrochemical cycling and the fundamental stress relief mechanisms that limit solid-state device performance," National Science Foundation, June 1, 2020 - May 31, 2023, $513,623, PI with Co-PI S. A. Hackney

Found on CV
123

"Lithium Nano-mechanics," Ford Motor Company, May 1, 2020 - April 30, 2022, $ 196,984, PI with Co-PI A. Masias

Found on CV
122

"Fundamental Mechanisms of Time and Length Scale Dependent Flow in Crystalline Metals and Alloys at High Homologous Temperatures," National Science Foundation, June 1, 2020 - May 31, 2023, $560,418, PI with Co-PI S. A. Hackney

Found on CV
121

"Collaborative Research: Defining Experimental Limits and Transforming the Frontier of Dynamic Nanoindentation and the Mechanical Characterization of Viscoelastic Solids," National Science Foundation (CMMI - Mechanics of Materials and Structures), June 1, 2020 - May 31, 2023, $394,953, PI

Found on CV
120

"Model Based Diagnostic Tool Development for Chemo-Mechanical Integrity at the Solid-State Electrolyte-Electrode Interfaces," January 1, 2020 - December 31, 2023, $1,2000,000, PI with Co-PI's S. A. Hackney, S. J. Visco and E. Nimon

Found on CV
119

"Collaborative Research: Defining Experimental Limits and Transforming the Frontier of Dynamic Nanoindentation and the Mechanical Characterization of Viscoelastic Solids," National Science Foundation (CMMI - Mechanics of Materials and Structures), August 2017 - July 2020, $394,953, PI

Found on CV
118

"Collaborative Research: Developing Design Principles for Next-Generation Li-Ion and Na-Ion High Capacity Anodes," National Science Foundation CBET Energy for Sustainability, July 2017 - June 2020, $202,067, Co-PI with PI Stephen A. Hackney at MTU

Found on CV
In 2019
117

"Nanoindentation of High Purity Lithium Films," Recent Advances in Nano Indentation Techniques, Indian Institute of Technology Bombay, Mumbai, India, December 8, 2019

Found on CV
116

"The Mechanisms of Stress Relaxation and Stress Intensification at the Lithium/Solid Electrolyte Interface," ARPA-E IONICS Category 1 Annual Program Review Meeting, Dallas, TX, May 30-31, 2019

Found on CV
115

"The Mechanisms of Stress Relaxation and Stress Intensification at the Lithium/Solid Electrolyte Interface," 235th Annual Meeting of the Electrochemical Society, Dallas, TX, May 26-30, Dallas, TX, May 26-30, 2019

Found on CV
114

"Nanoindenttaion of Viscoelastic Solids," Advances in Nanoindentation, Worcester Polytechnic Institute, Worcester, MA, May 15, 2019

Found on CV
113

"Center for Time and Length Scale Dependent Flow," Indo-US Science and Technology Forum (IUSSTF), June 1, 2019 - May 31, 2021, $72,000 (travel support only), PI with co-PI P. S. Phani

Found on CV
112

"Funded Extension - Mechanical Properties at the Protected Lithium Interface", UT-Battelle LLC (Manager for US Department of Energy, Oak Ridge National Laboratory), April 1 - May 31, 2019, $110,000, Co-PI with Nancy J. Dudney at Oak Ridge National Laboratory

Found on CV
111

"NSF MRI: Development of and Broad-Based Materials Research with the Next Generation Nanomechanical Testing Laboratory," National Science Foundation, August 2014 - July 2019, $1,542,631, Co-PI with PI George M. Pharr at UT and Co-PI Warren C. Oliver at Nanomechanics, Inc.

Found on CV
110

"Fundamental Mechanisms of Time and Length Scale Dependent Flow in Crystalline Metals and Alloys at High Homologous Temperatures," National Science Foundation, May 1, 2019 - April 30, 2022, $560,418, PI with Co-PI S. A. Hackney

Found on CV
109

"Small-Scale Mechanical Characterization of Viscoelastic Solids," 3M Corporation, January 2017 - December 2019, $45,000, PI

Found on CV
108

"The Development of Next Generation Small-Scale Mechanical Characterization Methods for Materials in Extreme Environments," US Department of Energy (NEUP), October 2016 - September 2019, $700,000, PI with Co-PI Stephen A. Hackney at MTU

Found on CV
107

E. G. Herbert, N. J. Dudney, M. Rochow, V. Thole and S. A. Hackney, "On the mechanisms of stress relaxation and intensification at the lithium/solid-state electrolyte interface," J. Mater. Res. 34 21, 3593-3616 (2019).

Found on CV
106

P. S. Soman, E. G. Herbert, K. E. Aifantis and S. A. Hackney, "Analysis of local grain boundary strengthening utilizing the extrinsic indentation size effect," J. Mater. Res. 34 13, 2347-2369 (2019).

Found on CV
In 2018
105

"Beyond Li-Ion: Stress Relaxation and Intensification in Lithium," Symposium on Small Scale Mechanical Behavior honoring the contributions of Dr. George M. Pharr IV, College Station, TX, December 7, 2018

Found on CV
104

"Mechanisms of Stress Relaxation and Stress Intensification at the Lithium/Solid Electrolyte Interface," Materials Research Society, Boston, MA, November 29, 2018

Found on CV
103

"Nanoindentation of High Purity Vapor Deposited Lithium Films: A Mechanistic Rationalization of Diffusion-Mediated Flow," Materials Science and Technology, Columbus, OH, October 14, 2018

Found on CV
102

"Nanoindentation of High Purity Vapor Deposited Lithium Films: A Mechanistic Rationalization of Diffusion-Mediated Flow," Departmental Seminar, Mechanical Engineering, University of North Dakota, Grand Forks, ND, April 12 - 13, 2018

Found on CV
101

"Coupling Between the Mechanical Behavior of Lithium and Device Performance," Gordon Research Conference: Batteries. The Opportunity in the Invisible: Integrating Theory, Synthesis, Characterization and System Validation for the Battery of Tomorrow, Ventura, CA, February 25 - March 2, 2018

Found on CV
100

"Using Indentation Geometry to Study Grain Boundary Strengthening Mechanism," Prasad Soman, Symposium on Small Scale Mechanical Behavior honoring the contributions of Dr. George M. Pharr IV, College Station, TX, December 7, 2018

Found on CV
99

"Using Indentation Geometry to Study Grain Boundary Strengthening Mechanism," Prasad Soman, Materials Science and Technology, Columbus, OH, October 14, 2018

Found on CV
98

"Time dependent mechanical behavior of LiPON," Violet Thole, Gordon Research Conference: Batteries. The Opportunity in the Invisible: Integrating Theory, Synthesis, Characterization and System Validation for the Battery of Tomorrow, Ventura, CA, February 25 - March 2, 2018

Found on CV
97

"Mechanical Properties at the Protected Lithium Interface", UT-Battelle LLC (Manager for US Department of Energy, Oak Ridge National Laboratory), September 2014 - May 2018, $1M, Co-PI with Nancy J. Dudney at Oak Ridge National Laboratory

Found on CV
96

"Nanomechanical Characterization of Next Generation Energy Materials", Indo-US Science and Technology Forum, January 2017 - December 2018, $72,000 (travel support only), PI

Found on CV
95

"MRI: Development of a High-Temperature Nano-Scale Mechanical Testing System," NSF, Major Research Instrumentation Program, August 2013 - July 2018, $1.7M, Co-PI with PI George M. Pharr and Co-PI Warren C. Oliver

Found on CV
94

E. G. Herbert, S. A. Hackney, N. J. Dudney and P. S. Phani, "Nanoindentation of high purity vapor deposited lithium films: The elastic modulus," J. Mater. Res. 33 10, 1335-1346 (2018).

Found on CV
93

E. G. Herbert, S. A. Hackney, N. J. Dudney, V. Thole and P. S. Phani, "Nanoindentation of high purity vapor deposited lithium films: A mechanistic rationalization of diffusion-mediated flow," J. Mater. Res. 33 10, 1347-1360 (2018).

Found on CV
92

E. G. Herbert, S. A. Hackney, N.J. Dudney, V. Thole and P. S. Phani, "Nanoindentation of high purity vapor deposited lithium films: A mechanistic rationalization of the transition from diffusion to dislocation-mediated flow," J. Mater. Res. 33 10, 1361-1368 (2018).

Found on CV
91

P. P. Soman, E. G. Herbert, K. E. Aifantis, S. A. Hackney, "Effect of Processing on Nix-Gao Bilinear Indentation Results Obtained for High Purity Iron," MRS Advances 3 (8-9), 477-486 (2018).

Found on CV
In 2017
90

"Mechanisms of Plastic Deformation in Vapor Deposited Lithium Films," Group Seminar, Physical Chemistry of Materials, Oak Ridge National Laboratory, July 13, 2017

Found on CV
89

"The Mechanical Behavior of Vapor Deposited Lithium Films," Beyond Lithium Ion X, IBM, Almaden, CA, June 27-29, 2017

Found on CV
88

"Mechanical Properties at the Protected Lithium Interface," Annual Merit Review and Peer Evaluation Meeting, Washington, DC, June 5-9, 2017

Found on CV
87

"Small-Scale Mechanical Behavior of Viscoelastic Solids," Departmental Seminar, Materials Science and Engineering, Texas A&M University, College Station, TX, April 3, 2017

Found on CV
86

"Advanced Dynamic Techniques in Small-Scale Mechanical Characterization," Workshop on Advanced Nanomechanical Characterization, ARCI, Hyderabad, India, March 20-21, 2017

Found on CV
85

"Dynamic nanoindentation studies to probe solid electrolyte/lithium interfaces," Materials Research Society, Symposium ES6: Mechanics of Energy Storage and Conversion - Batteries, Thermoelectrics and Fuel Cells, Spring Meeting, Phoenix, AZ April 2017

Found on CV
84

"Stability and cycling of metallic Lithium with an inorganic solid electrolyte", Nancy J. Dudney, Miaofang Chi, Jeff Sakamoto, and Erik Herbert, ACS meeting, San Francisco, CA March 2017, invited presentation

Found on CV
83

"REF-RS: Structure-Property Relationships in Polymer Fibers for Next Generation Armor Applications," July 2016 - August 2017, $24,885, Michigan Technological University, PI

Found on CV
82

"Critical Assessment of a Recently Developed Nanoindentation Method Capable of Predicting the Uniaxial Stress-Strain Curve of Advanced Structural Engineering Materials," Oak Ridge Institute for Science & Education (ORAU), June 2016 - May 2017, $5,000, PI

Found on CV
In 2016
81

"Dynamic Nanoindentation: State-of-the-Art Experimental Methods," Gordon Research Conference on Thin Film and Small Scale Mechanical Behavior, Lewiston, Maine, July 24-29, 2016

Found on CV
80

"Nanoindentation: Fundamentals of Experimental Methods", Graduate School of the Collaborative Research Center SFB 986: Tailor-Made Multi-Scale Materials Systems, Hamburg, Germany; June 9, 2016

Found on CV
79

"Nanoindentation and the Dynamic Characterization of Viscoelastic Solids," Helmholtz-Zentrum Geesthact Institute, Geesthact, Germany, June 7, 2016

Found on CV
78

"Enterprise: Foundry Effects on Brake Rotor FRF Testing," General Motors, September 2015 - June 2016, $17,500, PI with Co-PI Joseph H. Thompson and Co-PI Russell E. Stein, both at MTU

Found on CV
77

"Aging and Degradation of Nanostructured Ferritic Steel to Ion Irradiation at Elevated Temperature - Accelerated Test and Validation," Nuclear Energy University Programs (NEUP) through DOE, July 2013 - June 2016, $800K, Co-PI with PI Y. Zhang at UT

Found on CV
76

B. Merle, K. S. Nicholson, E. G. Herbert and M. Go---ken, "An improved method for point deflection measurements on rectangular membranes," Materials & Design 109 (2016): 485-491.

Found on CV
In 2015
75

"The hardness and elastic modulus of lithium and solid electrolytes for next generation battery applications," Fifth International Indentation Workshop, November 1-5, 2015

Found on CV
74

"Quantifying the Separate Effects of Temperature and Irradiation on the Constitutive Uniaxial Stress-Strain Behavior of Structural Nuclear Reactor Materials at Micron and Sub-Micron Length Scales," Nuclear Energy University Programs (NEUP) through DOE, July 2012 - June 2015, $900K, PI

Found on CV
73

"High Temperature Micromechanical Characterization Lab," Nuclear Energy University Programs (NEUP) through DOE, July 2011 - June 2015, $1.2M, PI

Found on CV
72

E. G. Herbert, P. Sudharshan Phani and K. E. Johanns, "Nanoindentation of viscoelastic solids: A critical assessment of experimental methods," Current Opinion in Solid State and Materials Science 19 6 (2015): 334-339.

Found on CV
71

S. Yu, R. D. Schmidt, R. Garcia-Mendez, E. Herbert, N. J. Dudney, J. B. Wolfenstine, J. Sakamoto and D. J. Siegel, "Elastic Properties of the Solid Electrolyte Li7La3Zr2O12 (LLZO)," Chemistry of Materials 28 1 (2015): 197-206.

Found on CV
70

M. Sebastiani, K. E. Johanns, E. G. Herbert and G. M. Pharr, "Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges," Current Opinion in Solid State and Materials Science 19 6 (2015): 324-333.

Found on CV
69

P. O. Guglielmi, E. G. Herbert, L. Tartivel, M. Behl, A. Lendlein, N. Huber and E. T. Lilleodden, "Mechanical characterization of oligo (ethylene glycol)-based hydrogels by dynamic nanoindentation experiments," Journal of the mechanical behavior of biomedical materials 46 (2015): 1-10.

Found on CV
68

M. Sebastiani, K. E. Johanns, E. G. Herbert, F. Carassiti and G. M. Pharr, "A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings," Philosophical Magazine 95 16-18 (2015): 1928-1944.

Found on CV
In 2014
67

"Collaborative Research: Aging and Disease Effects on Viscous Energy Dissipation of Bone as Characterized by Nanoindentation," NSF, July 2011 - June 2014, $226,074, Co-PI with PI's G. M. Pharr at UT and J. S. Nyman at Vanderbilt

Found on CV
66

"Energy Frontier Research Center for Defect Physics in Materials," DOE Basic Energy Sciences Program through UT Battelle, July 2009 - June 2014, $500,000 to UTK, $66,000 contracted to E. Herbert as Co-PI (started July 1, 2010)

Found on CV
In 2013
65

"Short course: Introduction to nanoindentation and related techniques," ECI conference, Nanomechanical Testing in Materials Research and Development, Algarve, Portugal, October 2013

Found on CV
64

"Enhanced Structural and Functional Performance of Nano-engineered Silicon Carbide," Joint Institute for Advanced Materials (UT/ORNL), December 1, 2012 - June 30, 2013, $50,000, $15,000 contracted to E. Herbert as Co-PI

Found on CV
63

E. G. Herbert, K. E. Johanns, R. S. Singleton and G. M. Pharr, "On the measurement of energy dissipation using nanoindentation and the continuous stiffness measurement technique," Journal of Materials Research 28 21 (2013): 3029-3042.

Found on CV
62

D. Catoor, Y. F. Gao, J. Geng, M. J. N. V. Prasad, E. G. Herbert, K. S. Kumar, G. M. Pharr and E. P. George, "Incipient plasticity and deformation mechanisms in single crystal Mg during spherical nanoindentation," Acta Materialia, 61 8 (2013): 2953-2965.

Found on CV
61

C. Su, E. G. Herbert, S. Sohn, J. A. LaManna, W. C. Oliver and G. M. Pharr, "Measurement of power-law creep parameters by instrumented indentation methods," Journal of the Mechanics and Physics of Solids, 61 (2013): 517-536.

Found on CV
In 2012
60

"Development of Small-Scale Mechanical Characterization Techniques to Predict the Constitutive Uniaxial Stress-Strain Behavior of Structural Nuclear Reactor Materials at Micron and Sub-Micron Length Scales," Joint Institute for Advanced Materials (UT/ORNL), December 1, 2011 - June 30, 2012, $32,000, PI

Found on CV
59

"Experimental Studies of Small-Scale Mechanical Behavior," DOE Basic Energy Sciences Program through UT Battelle, September 1, 2011 - July 31, 2012, $122,277 to UTK, $66,000 contracted to E. Herbert as Co-PI

Found on CV
58

"Mechanical Properties of Thin Film Electrode Materials," Oak Ridge National Laboratory, Laboratory Directed Research and Development (LDRD), DOE Basic Energy Sciences Program through UT Battelle, January 2011 - December 2012, $24,500 to UTK, $20,000 contracted to E. Herbert as Co-PI

Found on CV
In 2011
57

"In Situ Mechanical Testing for Small-Scale Tribological Studies," Joint Institute for Advanced Materials (UT/ORNL), December 2010 - June 2011, $50,000, $37,640 to E. Herbert as Co-PI

Found on CV
56

"Experimental Studies of Small-Scale Mechanical Behavior," DOE Basic Energy Sciences Program through UT Battelle, September 2010 - July 2011, $114,892 to UTK, $66,000 contracted to E. Herbert as Co-PI

Found on CV
55

E. G. Herbert, W. E. Tenhaeff, N. J. Dudney and G. M. Pharr, "Mechanical characterization of LiPON films using nanoindentation," Thin Solid Films, 520 1 (2011): 413-418.

Found on CV
54

J. S. Nyman, J. L. Even, C. H. Jo, E. G. Herbert, M. R. Murry, G. E. Cockrell, E. C. Wahl, R. C. Bunn, C. K. Lumpkin Jr., J. L. Fowlkes and K. M. Thrailkill, "Increasing duration of type 1 diabetes perturbs the strength-structure relationship and increases brittleness of bone," Bone 48 4 (2011): 733-740.

Found on CV
53

J. Annett, Y. F. Gao, G. L. W. Cross, E. G. Herbert and B. N. Lucas, "Mesoscale friction anisotropy revealed by slidingless tests," Journal of Materials Research, 26 18 (2011): 2373-2378.

Found on CV
52

J. Hay, P. Agee and E. Herbert, "Measuring the complex modulus of polymers by instrumented indentation testing," Experimental Techniques, 37 3 (2011): 55-61.

Found on CV
In 2010
51

"Mechanical Characterization of LiPON Films Using Nanoindentation," Agilent Technologies Web Seminar, March 2010

Found on CV
50

"Nanoindentation and the mechanical characterization of viscoelastic solids," NIST Polymer Interphase Consortium, Kingsport, TN (Eastman Chemical), March 2010

Found on CV
49

"Nanoindentation and the Mechanical Characterization of Viscoelastic Solids," Agilent Technologies Web Seminar, October 2010

Found on CV
48

"Mechanical characterization of LiPON films using nanoindentation," Materials Research Society, November 2010

Found on CV
47

"Mechanical Properties of Thin Film Electrode Materials," Oak Ridge National Laboratory, Laboratory Directed Research and Development (LDRD), DOE Basic Energy Sciences Program through UT Battelle, January 2010 - September 2010, $21,924 to UTK, $20,000 contracted to E. Herbert as Co-PI

Found on CV
46

G. M. Pharr, E. G. Herbert and Y. Gao, "The indentation size effect: A critical examination of experimental observations and mechanistic interpretations," Annual Review of Materials Research, 40 (2010): 271-292.

Found on CV
45

J. L. Hay, P. Agee and E. G. Herbert, "Continuous stiffness measurement during instrumented indentation testing," Experimental Techniques, 34 3 (2010): 86-94.

Found on CV
In 2009
44

"Measurements of Mechanical Properties of Nanoscale Double-Clamped Beams," Agilent Technologies Web Seminar, June 2009

Found on CV
43

Nanomechanical Testing in Materials Research and Development, Barga, Italy October 2009

Found on CV
42

Society for Experimental Mechanics, Albuquerque, NM June 2009

Found on CV
41

Abbott Vascular, Sunnyvale, CA April 2009

Found on CV
40

E. G. Herbert, W. C. Oliver, M. P. de Boer and G. M. Pharr, "Measuring the elastic modulus and residual stress of freestanding thin films using nanoindentation techniques," Journal of Materials Research, 24 9 (2009): 2974-2985.

Found on CV
39

E. G. Herbert, W. C. Oliver, A. Lumsdaine and G. M. Pharr, "Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation," Journal of Materials Research, 24 3 (2009): 626-637.

Found on CV
In 2008
38

Society of Engineering Science, Urbana-Champaign, IL October 2008

Found on CV
37

Mechanics of Time Dependent Materials, Monterray, CA, April 2008

Found on CV
36

NIST Polymer Interphase Consortium Workshop, Gaithersburg, MD January 2008

Found on CV
35

"In-Situ Examination of Nanoscale Deformation of Thin Film Bridges within a Scanning Electron Microscope," Materials Research Society, Boston, MA December 2008

Found on CV
34

W. C. Oliver and E. G. Herbert, "Measurement of properties of thin specimens based on experimentally acquired force-displacement data," US patent number US7441465 B2 October 28 2008.

Found on CV
33

E. G. Herbert, W.C. Oliver and G. M. Pharr, "Nanoindentation and the dynamic characterization of viscoelastic solids," Journal of Physics D-Applied Physics, 41 7 (2008): Art. No. 074021.

Found on CV
In 2007
32

Third International Instrumented Indentation Workshop, Cambridge, UK July 2007

Found on CV
31

European Polymer Congress, Portoroz, Slovenia June 2007

Found on CV
30

Society for Experimental Mechanics, Springfield, MA June 2007

Found on CV
29

General Motors Tech Center, Warren, MI May 2007

Found on CV
28

Good Year Tire and Rubber, Akron, OH February 2007

Found on CV
27

3M Corporation, Minneapolis, MN March 2007

Found on CV
26

H. Bei, S. Shim, E. P. George, M. K. Miller, E. G. Herbert, and G. M. Pharr, "Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique," Scripta Materialia, 57 5 (2007): 397-400.

Found on CV
25

J. R. Greer, S. George and E. Herbert, "Effective use of focused ion beam in investigating fundamental mechanical properties of metals at the sub-micron scale," Materials Research Society Symposium Proceedings, 893 E 1 (2007).

Found on CV
24

D. Lee, X. Wei, X. Chen, M. Zhao, S.C. Jun, J. Hone, E. G. Herbert, W. C. Oliver and J. W. Kysar, "Microfabrication and mechanical properties of nanoporous gold at the nanoscale," Scripta Materialia, 56 5 (2007): 437-440.

Found on CV
In 2006
23

US National Congress of Applied and Theoretical Mechanics, Boulder, CO June 2006

Found on CV
22

E. G. Herbert, W.C. Oliver and G. M. Pharr, "On the measurement of yield strength by spherical indentation," Philosophical Magazine, 86 33-35 (2006): 5521-5539.

Found on CV
21

D. Lee, M. H. Zhao, X. D. Wei, X. Chen, S. C. Jun, J. Hone, E. G. Herbert, W. C. Oliver and J. W. Kysar, "Observation of plastic deformation in freestanding single crystal Au nanowires," Applied Physics Letters, 89 11 (2006): Art. No. 111916.

Found on CV
In 2004
20

ECI Conference on Instrumented Indentation Testing, Crete, Greece October 2004

Found on CV
19

Wichita State University, Wichita, KS 2004

Found on CV
18

H. Tsou, A. D. Westwood, J. S.Schulze and E. G. Herbert, "Cure state distributions in rubbers by dynamic nano-indentation," Rubber Chemistry and Technology, 77 4 (2004): 678-690.

Found on CV
In 2003
17

Seoul and Daejeon, South Korea 2003

Found on CV
In 2002
16

T. T. Meek, A. Kobayashi, E. Herbert and R. L. White, "Superconductive coatings fabricated via external injection into a d.c. plasma," Vacuum, 65 3-4 (2002): 409-413.

Found on CV
In 2001
15

E. G. Herbert, G. M. Pharr, W. C. Oliver, B. N. Lucas and J. L. Hay, "On the measurement of stress-strain curves by spherical indentation," Thin Solid Films, 398 (2001): 331-335.

Found on CV
14

H. D. Espinosa, M. Fischer, E. G. Herbert and W. C. Oliver, "Identification of residual stress state in an RF-MEMS device," white paper, (2001) MTS Systems Corporation.

Found on CV
In 2000
13

Colorado School of Mines, Colorado Springs, CO 2000

Found on CV
In 1999
12

P. J. Wolff, B. N. Lucas and E. G. Herbert, "Computing thin film mechanical properties with the Oliver and Pharr method," Materials Research Society Symposium Proceedings, 594 1 (1999): 301, Cambridge University Press.

Found on CV
11

M. Tabbal, P. Merel, M. Chaker, M. A. El Khakani, E. G. Herbert, B. N. Lucas and M. E. O'Hern, "Synthesis of diamond-like-carbon coatings by pulsed laser deposition: optimization of process parameters," Surface & Coatings Technology, 116 (1999): 452-455.

Found on CV
10

M. Tabbal, P. Merel, M. Chaker, M. A. El Khakani, E. G. Herbert, B. N. Lucas and M. E. O'Hern, "Effect of laser intensity on the microstructural and mechanical properties of pulsed laser deposited diamond-like-carbon thin films," Journal of Applied Physics, 85 7 (1999): 3860-3865.

Found on CV
In 1998
9

G. Radhakrishnan, J. C. Uht, W. Park, M. R. Hilton, P. M. Adams, P. C. Ward, E. G. Herbert and B. N. Lucas, "Rolling Contact fatigue of TiC-coated bearing balls," Materials Research Society Symposium Proceedings, 522 (1998): 445-450.

Found on CV
8

T. F. Page, G. M. Pharr, J. C. Hay, W. C. Oliver, B. N. Lucas, E. Herbert and L. Riester, "Nanoindentation characterization of coated systems: P:S2 - a new approach using the continuous stiffness technique," Materials Research Society Symposium Proceedings, 522 (1998): 53-64.

Found on CV
Unspecified
7

"Nanoindentation and the mechanical characterization of viscoelastic solids,"

Found on CV
6

"On the measurement of yield strength by spherical indentation,"

Found on CV
5

"Advanced techniques in instrumented indentation testing,"

Found on CV
4

Nanoindentation user group meetings hosted by the MTS Systems Corporation

Found on CV
3

Unfunded Proposals Under Development for Resubmission

Found on CV
2

"NSF MRI: High resolution Field Emission Environmental Electron Microscope with Analytical Capabilities for Interdisciplinary Research and Education," $700,000, Co-PI with K. A. Perrine, C. Mazzoleni, B. P. Lee, and P. Abadi

Found on CV
1

39 Publications (Indices from Google Scholar - Citations: 2677, h-index: 22, i10-index: 28)

Found on CV
Search Profiles
Colleagues
Profile Picture of Steven A Walton
Michigan Technological University
Profile Picture of Shannon Brodeur
Michigan Technological University
Profile Picture of Kari B. Henquinet
Michigan Technological University
People Also Viewed
Profile Picture of Victor Bissonnette
Berry College
Profile Picture of Dustin Walcher
Southern Oregon University
Profile Picture of Sarah Alber
Illinois State University
Recommended Grants
Thanks for using Grant Forward. Please log-in or sign-up to continue searching.